fbpx
Auckland's House Painting & Commercial Painting Specialist
Roof Colours NZ: Choosing a Colour When You Repaint Your Roof

Quick answer: A repaint gives you far more roof colours than the factory range offers, including COLORSTEEL matches in Resene Summit Roof and Dulux Roof & Trim, but heat, maker or council LRV limits, rainwater tanks and spouting should narrow the pick.

Most advice on roof colours NZ homeowners find online is written for someone ordering a brand-new roof: a maker’s colour chart, a few photos, a line about dark colours getting hot. A repaint is a different decision. The roof is already there, the walls and spouting may be staying, and you’re choosing a paint colour that has to work on old steel or tile for years. Keep the colour you’ve got, or use the repaint to change it? Go darker for a modern look, or lighter for a cooler roof space?

Free cost calculator

How much will roof painting cost?

Answer a few questions and we’ll email you an Auckland price range.

Open the Roof Painting Calculator →

The paint makers have already done much of the groundwork. Both major NZ roof paints come in colours matched to the COLORSTEEL range, so keeping a factory colour is straightforward, and changing it is mostly a question of how far you move.

The catches sit in the detail. A dark colour behaves differently on a roof than on a wall. Some cladding makers and councils limit how dark you can go. A rainwater tank needs a few simple steps after painting, and plastic spouting has its own colour rule. Get those settled before you fall for a colour chip, and the colour you choose will still look right when the scaffold comes down.


Keep It or Change It: Roof Colours NZ Roof Paints Can Match

Before you look at a single colour, work out what you’re starting from. A factory-coated steel roof, an old painted iron roof and a concrete tile roof all take paint, but they come at the colour decision from different places.

Factory colours versus a painted roof

A new long-run steel roof is ordered in a fixed range of factory colours. Resene’s Summit Roof data sheet calls COLORSTEEL and COLORBOND “pre coated metal roofing”: the colour is applied at the factory, which is why a reroof feels like a short list. You pick from what the maker produces.

Paint changes that. As Habitat by Resene puts it, “Total freedom of colour choice only comes with a painted roof.” Once a roof is being repainted, the colour is no longer limited to the factory list. It’s limited by the roof paint’s own range, by the condition of the roof, and by the practical rules we cover further down.

So the first question isn’t “which colour?” but “what is this roof, and is it ready for paint?” A COLORSTEEL roof that is faded and chalky is a different job from bare galvanised iron, and both are different from a concrete tile roof. If you’re not sure which you have, or whether it’s worth painting at all, the paint-or-replace question comes first. Our guide to the prep and primer a factory-coated steel roof needs before any colour goes on covers that side of it.

What the two main roof paints actually offer

Most Auckland roof repaints use one of two products, and their colour ranges are set out on the makers’ own pages.

Resene’s Summit Roof data sheet (January 2025 edition) lists its colours as the Resene Roof Colour Systems and selected colours from the Resene Total Colour System. Resene’s Summit Roof product page adds that the range includes Resene paint matches to popular COLORSTEEL and COLORBOND colours, and that Summit Roof can also be tinted to a range of Resene CoolColour colours.

Dulux’s Roof & Trim page says it comes in a selection of Dulux Colours of New Zealand and Colorsteel colours, in Gloss and Semi Gloss finishes. Dulux’s Colorsteel colours page goes further: “All Colorsteel® colours can be matched in Dulux Weathershield and Roof & Trim™ exterior paint.”

If you want your roof to stay the colour it was made in, both major roof paints can match it. And if you want to change, you’re not limited to a roofing chart. The roof-specific charts are the safest starting point, because those are the colours the makers have picked for roofs.

🎨 Painting tip: Find out what your roof was made in before you start. Ask the original roofer, check the building file, or have us look at the underside of a flashing where the factory colour hasn’t faded. Matching a named factory colour is easier than matching a weathered one by eye.

Keeping the same colour

Repainting in the same colour is often the sensible call. The walls, joinery and spouting were chosen to suit it. The house looks the way the neighbours expect. And if the existing roof is a factory colour such as Ironsand or Grey Friars, Dulux says every Colorsteel colour can be matched, and Resene offers matches to popular COLORSTEEL colours.

Keeping the colour also keeps the job simpler. The new coats cover a similar colour underneath, so you’re not asking the paint to hide a big change. Resene gives the usual number of coats as one to two depending on application method, and adds that “some colours may require an additional coat”. On a like-for-like repaint, that extra coat is less likely to be needed.

Changing the colour, and what a big change involves

Changing colour is where people get excited, and it’s a fair thing to want. A tired terracotta tile roof can look very different in a charcoal, and a pale roof can go darker to suit a modern repaint of the walls.

Three things change when you move away from the existing colour. The bigger the jump, especially from dark to light, the more likely that additional coat becomes, so the quote should say how many coats are allowed for. Everything else on the house has to be looked at again: spouting, fascias, barge boards and garage doors were all picked to sit with the old roof. And a roof that goes much darker needs the heat question settled first, which is the next section.

roof-painting Roof Colours NZ: Choosing a Colour When You Repaint Your Roofroof-painting Roof Colours NZ: Choosing a Colour When You Repaint Your Roof
A concrete tile roof part-way through a repaint, in two shots. In the second, the new dark grey coat covers the left side and the faded original tiles still show on the right.

Imagine a 1970s brick-and-tile house in Pakuranga with a faded brown concrete tile roof and cream walls. Repainting the tiles in a charcoal looks sharper, but the cream walls and brown spouting may now look dated against it. That’s often the moment a roof job becomes a roof-and-trims job, and it’s better to know that before the quote than after the roof is done.

One thing a colour change doesn’t alter is the primer the roof material needs. On factory-coated steel, Resene’s instructions call for a wash with Resene Heavy Duty Paint Prep and Oil Remover and a coat of Resene Pre-Coated Steel Primer, whatever topcoat colour follows. The roof decides the system; the colour sits on top of it. Where a dark CoolColour is chosen, the primer choice also has to suit the heat side of things, which we come to next.

If you’re redoing the walls too, our guide to matching wall colours to the roof you end up with works the other way round, starting from the roof and building the wall palette from it.

🎨 Painting tip: Decide the roof and the spouting together. A roof colour change that leaves the old spouting in place is the most common way a repaint ends up looking half-finished.

Want a price for your roof repaint?
Open the calculator →

Light or Dark Roof Colours: Heat, CoolColour, TSR and LRV

This is usually the first question once a darker roof is on the table. Will a black roof make the house hot? The honest answer has a few parts, and the makers’ own material covers them better than most of what’s online.

Why colour changes roof temperature

A roof sits in full sun for most of the day, and colour decides how much of that energy it absorbs. COLORSTEEL’s guide to roof colour choices for Auckland homes says lighter colours like white, light grey and beige reflect more sunlight, helping to keep your home cooler, while darker colours such as black, charcoal and deep blue tend to absorb more heat.

Resene puts the cost of that heat in terms of the roof itself. Its Summit Roof page describes dark colours on roofing as “suntraps”, soaking in the sun’s rays and “placing significant relentless stress on the coating and the substrate”. Heat makes materials move, and movement is hard on paint.

Before you rule out dark colours altogether, the same COLORSTEEL guide adds a balancing line: “with proper insulation and ventilation, any colour can be energy efficient.” A dark roof over a well-insulated ceiling is a different proposition from a dark roof over a bare one. If your ceiling insulation is thin, that’s the bigger lever on comfort, and it’s not something paint can fix.

What a CoolColour does, and doesn’t do

If you want a dark roof, the paint itself can take some of the heat out of it. Resene’s CoolColour page explains that a CoolColour replaces the standard carbon black pigment, which absorbs heat and light, with a pigment that lets much of the infrared part of the sun’s energy be reflected. It looks like a normal colour, but it doesn’t get as hot.

Resene lists the benefits as a reduction in the sun’s heating effect on exterior surfaces, less heat-related movement of the substrate, and the ability to choose a darker colour than you otherwise could. It says the technology works best in the dark shades most prone to heat build-up, naming Resene Nero, Resene Karaka and Resene Napa as examples, and that CoolColour versions are marked “cc” on Resene colour charts.

The same page carries two caveats. First, a CoolColour reduces heat-related problems but does not remove them: Resene’s own answer to “will it eliminate heat related issues?” is that it reduces the likelihood but won’t eliminate them. Second, a CoolColour and the standard version of the same colour use different pigments, which “can cause slight colour differences depending on the degree and type of light”. If you’re matching a CoolColour roof to standard-tinted trims, look at both samples outside.

Resene is also clear that a CoolColour isn’t a licence to go as dark as you like on any surface. Asked whether any dark colour is fine provided it’s a CoolColour, its answer is no: on old, unsound surfaces, especially over old coatings, you may be best to choose a lighter colour, and CoolColours “reduce but will not eliminate all heat related issues on timber, iron, UPVC and other substrates, including old paint coatings.” On an older roof with a tired coating underneath, a mid-tone can be the more durable choice.

There’s also a winter question. People worry that a heat-reflecting roof will make the house colder. Resene’s answer is that with an insulated house there will not be a significant or notable level of heat loss.

COLORSTEEL’s Auckland article takes a slightly different line, saying dark-coloured roofs “can help retain heat during the cooler months, reducing the need for heating.” Resene’s FAQ answers that point directly: “Passive heating during winter is minimal at best, and any small loss is outweighed by the reduced heat build-up in warmer months.” Both makers agree on the bigger point, though. Insulation and ventilation do more for winter comfort than the colour of the roof above them, so don’t choose a dark roof expecting it to warm the house.

The primer underneath matters on a dark roof

Colour charts don’t mention this one. The Summit Roof data sheet says: “For optimum heat reflection, use Resene Summit Roof with a primer coat of Resene Quick Dry white or Resene Galvo-Prime immediately below the Resene CoolColour topcoat. Primer selection will depend on substrate.”

Resene’s CoolColour page explains why. It uses two kinds of black tinter. One reflects infrared light. The other lets infrared pass straight through, and a colour made that way “must have a ‘solid’ base of CoolColour primer/undercoat” underneath it to reflect the heat back out. Resene says this often means two coats of that primer for full, opaque coverage, and that your ColorShop can tell you whether the colour you’re considering needs one.

In practice, a dark CoolColour roof is a system, not just a tin of topcoat. When you compare quotes, check that the primer is named and suits both the roof material and the colour you’ve chosen.

🎨 Painting tip: If a quote for a dark roof says only “two coats of roof paint”, ask which primer goes underneath and whether the colour is a CoolColour. The answer tells you whether the heat question has been thought about.

TSR and LRV in plain English

Two numbers turn up beside roof colour samples, and they measure different things. COLORSTEEL’s article on choosing a colour for your environment defines them.

Total Solar Reflectance (TSR) “relates to the temperature an object will reach on a hot summer’s day and measures the amount of solar energy reflected from that object”. A higher TSR means the roof absorbs less of the sun’s energy. Light Reflectance Value (LRV) “measures the total amount of visible light reflected by a surface”. In other words, LRV is about how light or dark the colour looks; TSR is about how hot it gets.

That difference is the whole point of a CoolColour. Resene notes that LRV “only considers how a colour looks, not how it performs”, and that it can provide TSR measures for its CoolColours. A dark CoolColour can have a low LRV, so it looks dark, while reflecting more heat than its LRV suggests. That matters when a rule is written as an LRV limit, which is where the next section starts.


Rules and Practical Limits on Your Roof Colour

For many homes, nothing limits a roof colour beyond the paint’s own range. But a few rules can take a colour off the list before you’ve ordered a sample, so check these early.

Cladding and roofing makers’ colour limits

Some building products come with their own colour limits, set by the maker. Resene’s CoolColour page puts it plainly: “Before you make your final colour choice always check with the supplier of the substrate that you are planning to paint, as they may have mandatory LRV and/or TSR restrictions that you must abide by for code of compliance requirements.” It repeats the point in its FAQ, saying many local authorities and cladding suppliers set a minimum LRV, and that most are comfortable with Resene’s alternative TSR figures for CoolColours.

For a roof, that means two checks. Is the roofing still under a maker’s warranty that says anything about painting or colour? Does the maker publish a colour limit for its product?

If either answer is yes, the maker’s written conditions decide the colour, not the colour chart. COLORSTEEL’s warranty and maintenance page sets out its warranties by product and environment and says to contact COLORSTEEL for confirmation of your warranty for anything within 100 metres of a salt water body. If your roof is still young enough to be under warranty, read that page before anyone paints it.

Council LRV limits and Special Character Areas

Councils sometimes set colour or reflectance limits too. COLORSTEEL’s environment article says local councils sometimes require low levels of LRV for safety reasons, giving the example of a home built under a flight path, or for environmental aesthetic reasons. Where a limit like that applies, it’s usually tied to a consent condition or a specific planning rule for the site.

Character areas raise a related question. If your home sits in the Auckland Unitary Plan’s Special Character Areas overlay, the overlay’s chapter, D18, lists colour among the matters council weighs when it assesses additions and alterations that need consent: “whether the colour scheme is compatible with the age and detailing of the building”. It reads as an assessment matter for work that already needs consent, not a standalone colour rule for a straight repaint. The chapter is currently marked with changes from Plan Change 120, so the wording may move.

Important note: If your home has a resource consent with colour or reflectance conditions, sits in a Special Character Area or heritage overlay, or you’re unsure whether a colour change needs approval, check with Auckland Council before you commit. We can tell you what a roof paint can do; whether a colour is allowed on your site is a council question.

Collecting rainwater from a painted roof

If your home collects drinking water off the roof, the colour doesn’t change whether you can keep doing so, but the paint and the process do.

Resene rates Summit Roof as suitable for the collection of drinking water, and gives one condition: “Disconnect roof downpipes until after the first shower of rain in order to flush away surplus non-toxic wetting agents before the surface is used for the collection of drinking water.” Resene’s product page says the same in simpler words, adding that you reconnect the downpipes after the first heavy showers.

Dulux lists its Roof & Trim Gloss as “Safe for drinking water collection” on its Roof & Trim page. If you’re on tank water, tell your painter at the quote stage so the right product is specified and the downpipe step is planned, not remembered on the last day.

Spouting, fascias and the uPVC rule

This one sits in the limitations list on the Summit Roof data sheet, and it catches people out: “Light colours are recommended for UPVC surfaces as dark shades will cause warping. Use a Resene CoolColour where available.”

dark-charcoal-steel-roof-white-plastic-spouting-brick-house Roof Colours NZ: Choosing a Colour When You Repaint Your Roof
Illustration: a dark charcoal steel roof above white plastic spouting, the combination the data sheet’s uPVC line is about.

If your spouting and downpipes are plastic (uPVC), and you’re taking the roof dark and want the spouting to match, that line matters. Painting plastic spouting in a dark standard colour risks warping it. The choices are a lighter spouting colour, a CoolColour where one is available in the shade you want, or replacing the spouting with metal in the colour you’re after, which is a roofing job rather than a painting one.

Metal fascias, barge boards and metal spouting follow the roof more easily. Resene notes Summit Roof may also be used on properly prepared COLORSTEEL or COLORBOND walls and on primed timber such as barge boards, “for a consistent topcoat with the roof”. That’s useful when you want the roof and the trims to read as one colour.

🎨 Painting tip: Look up at your spouting before choosing a dark roof. If it’s plastic, sort out the spouting colour first, then pick the roof to suit it.

Want a price for your roof repaint?
Open the calculator →

Testing a Roof Colour Before It Goes On

A roof is the biggest single colour on most houses, and you see it from angles you never see a colour chip from: across the street, from the end of the drive, from the neighbour’s deck. That’s why testing matters more on a roof than almost anywhere else.

Why roof colours look different from the chart

Habitat by Resene warns that roof colours, seen on the roof, “may look more blue/brown/red/green etc than on a sample or brochure.” A whole roof seen from the street is a very different thing from a small card held in your hand.

COLORSTEEL gives the practical fix in its environment article: test your roof colour samples in different lighting conditions to see how they appear at various times of the day. Do it outside, not under the kitchen downlights.

Your house style and your street

COLORSTEEL’s environment article suggests starting with what’s already there: note the existing colours of the walls, trim and window joinery, because the roof should sit with them. It adds that traditional homes often suit more classic, neutral tones, while contemporary houses can carry bolder colours, and suggests a stroll around your neighbourhood to see which colours are common in your area.

roof-painting-2 Roof Colours NZ: Choosing a Colour When You Repaint Your Roof
A dark roof over light weatherboard and dark brick: the roof, walls and spouting read as one scheme.

People often ask which roof colour is the most popular in New Zealand. We don’t have a verified national figure, and we’d rather not guess. What you can check is your own street, which is the view your roof will be judged against anyway. On a street of villas, a roof that echoes the traditional palette usually sits better than one that shouts. On a newer street, you have more room to move.

How to run a fair test

A simple routine does the job:

  1. Get a large sample of each shortlisted colour. A testpot painted onto a piece of offcut steel or card is more honest than a printed chip.
  2. Hold the samples up against the actual roof, or lay them on a low part of it where it’s safe to reach, rather than against a wall.
  3. Look at them in the morning, at midday and late in the afternoon, and on an overcast day as well as a sunny one.
  4. Look from the street and from where you usually arrive home, not just from the garden.
  5. Put the wall, spouting and joinery colours next to the roof sample at the same time.

If two shortlisted colours look almost the same outside, take the lighter one. You get the look you wanted with less heat on the roof.

Gloss, cleaning and fading

Colour isn’t the only visual choice. Habitat by Resene notes that “Glossier paints are easier to clean, while flatter paints tend to hold onto dirt.” On a roof, that affects how it looks after a few years of Auckland weather. Summit Roof’s finish is satin; Dulux Roof & Trim is sold in gloss and semi gloss. A lower sheen can suit a softer, more modern look. Just know it trades off against how easily the roof sheds dirt.

Every colour changes over time in strong sun. Resene says the colours on its Summit Roof chart “have been chosen for the durability and colour-fastness of their pigments”, and COLORSTEEL’s warranty page describes its paint warranty as covering the surface against flaking, peeling and excessive fade. If you go off the roof chart into a general exterior colour, ask whether that colour is recommended for roofing before you commit. We’d rather steer you to a roof-chart colour that’s close than put a colour on a roof that wasn’t chosen for one.

🎨 Painting tip: Photograph your shortlisted samples on the roof at the same time each day for a few days. Comparing the photos side by side shows you how each colour shifts in Auckland light.


How We Settle the Colour on an Auckland Roof Repaint

Colour is one decision inside a bigger job, and it fits into the way we run roof repaints where the colour choice is part of the plan from day one.

Start with the roof’s condition, not the chart

Before anyone talks colour, we look at whether the roof is worth painting and what it needs. The material decides the primer, and the primer can decide which colours work best over it. A factory-coated steel roof, bare galvanised iron and concrete tiles each take a different system. Resene, for example, names a different Summit Roof primer for pre-coated metal roofing, for weathered galvanised steel or Zincalume, and for previously painted roofs, and says galvanised steel and Zincalume must be primed before Summit Roof goes on.

If the roof is rusted through or failing, no colour will save it, and we’ll tell you that up front. A new roof is a different job, done by a roofer.

Bring the colour decision into the quote

Once the roof is assessed, the colour feeds straight into the quote. A like-for-like colour, a step change, or a dark CoolColour with its own primer can mean different coat counts and products, so it belongs in the written scope rather than being decided on the morning the painters arrive. For the price side, see how roof repaint prices change with roof type and size on our own jobs, or use the roof calculator for an emailed Auckland range.

If you’d like a hand with the colour itself, our free colour consultation (available in selected areas) covers colour selection for the whole exterior, including roof, walls, trims and spouting. You can book a colour consultation and on-site appraisal; the live booking page describes it as a free on-site project appraisal based on your needs, with no obligations.

One person who owns the job on site

On every Superior Painters job you have a dedicated project manager who, as our process page puts it, will be on site each day and is your sole point of contact. On a roof job that matters for colour too: the person who agreed the colour with you is the person checking it goes on as specified, including the primer under a CoolColour and the downpipes being disconnected if you’re on tank water.

At the end there’s a final inspection with your project manager, following our 97-point checklist. Only when you’re satisfied do we consider the project complete.

Timing the work

Roof paint has temperature limits, so the season matters. Resene says not to apply Summit Roof below 8°C, or when it’s liable to drop below 8°C while drying, and its spray instructions warn against painting a surface too hot to keep a hand on. In Auckland that usually points to the drier, warmer months, roughly late spring to early autumn, with early starts on hot days. Settling the colour over winter means the job is ready to go when the weather is.

🎨 Painting tip: Have the colour decided and written into the quote before the job is booked in. Changing your mind once the primer is on is possible, but it can change the system and the timeline.


Pick the Roof First, Then Everything Else

A roof colour is the one choice on a house that everything else has to answer to. Settle it with the roof’s condition, the heat, any maker or council limit, your water tank and your spouting in mind, test it in real light, and the walls and trims fall into place around it. Choose it from a phone screen and you’ll be living with the difference for years.

➡ Book a free consultation with Superior Painters
➡ See our before and after painting transformations
➡ Repaint your roof in the colour you settle on


Can I change my roof colour when I repaint?

Yes. Repainting frees you from the factory colour list. Resene Summit Roof comes in the Resene Roof Colour Systems plus selected Total Colour System colours, and Dulux Roof & Trim in a selection of Dulux and Colorsteel colours. Check any maker warranty conditions and council limits first, and allow for an extra coat on a big colour change.

What roof colours are available in NZ roof paint?

Resene Summit Roof lists the Resene Roof Colour Systems and selected colours from the Resene Total Colour System, including matches to popular COLORSTEEL and COLORBOND colours and a range of CoolColours. Dulux Roof & Trim comes in a selection of Dulux Colours of New Zealand and Colorsteel colours, in gloss and semi gloss.

Can you match my existing COLORSTEEL roof colour?

Usually, yes. Resene says Summit Roof is available in paint matches to popular COLORSTEEL colours, and Dulux says all Colorsteel colours can be matched in Weathershield and Roof & Trim. Matching the named factory colour is more reliable than matching a faded roof by eye, so find out what your roof was made in.

Will a dark roof make my house hotter?

A dark roof absorbs more of the sun's heat than a light one, and COLORSTEEL notes lighter colours reflect more sunlight. Insulation matters too: COLORSTEEL says that with proper insulation and ventilation any colour can be energy efficient. A Resene CoolColour reflects more infrared heat, which reduces but does not eliminate heat-related stress.

What is the difference between LRV and TSR?

LRV, light reflectance value, measures how much visible light a colour reflects, so it describes how light or dark it looks. TSR, total solar reflectance, measures how much of the sun's energy is reflected, so it relates to how hot the surface gets. A dark CoolColour can have a low LRV while reflecting more heat than a standard dark colour.

Do I need council approval to change my roof colour in Auckland?

The Special Character Areas chapter of the Unitary Plan treats colour as an assessment matter for work that needs consent, rather than setting a colour list for a straight repaint. A resource consent on your property may still carry colour or reflectance conditions. If your home is in an overlay or has consent conditions, check with Auckland Council before you commit.

Can I still collect drinking water after my roof is painted?

With a suitable roof paint, yes. Resene says Summit Roof is suitable for collecting drinking water, provided the downpipes are disconnected until after the first shower of rain flushes away surplus wetting agents. Dulux lists Roof & Trim Gloss as safe for drinking water collection. Tell your painter at the quote stage so it is planned.

Can I paint plastic spouting to match a dark roof?

Be careful. The Resene Summit Roof data sheet says light colours are recommended for uPVC surfaces because dark shades will cause warping, and suggests a Resene CoolColour where available. Options are a lighter spouting colour, a CoolColour in your chosen shade where one exists, or metal spouting from a roofer in the colour you want.

How many coats does a roof colour change need?

The Resene Summit Roof data sheet gives one to two coats depending on application method and adds that some colours may require an additional coat. A big change, especially dark to light, is more likely to need it, and a dark CoolColour may need a specific white primer underneath. Your quote should state the primer and the number of coats.

How should I test a roof colour before choosing?

Use large painted samples rather than printed chips, hold them against the roof itself, and look at them in the morning, at midday, late afternoon and on an overcast day. Habitat by Resene warns roof colours can look more blue, brown, red or green on the roof than on a sample, and COLORSTEEL recommends checking samples at different times of day.

Related guides


WRITTEN BY SUPERIOR PAINTERS

Superior Painters is Auckland’s trusted house painting and commercial painting specialist. We offer interior painting, exterior painting, roof painting, plastering, wood staining, and house washing — with a dedicated project manager for every job and a free colour consultation service (selected areas). 100% NZ owned. Auckland-wide coverage.

Book Your Free Consultation


References

  1. Resene, Summit Roof waterborne roof paint data sheet D315S (January 2025)
  2. Resene, Summit Roof product page
  3. Resene, CoolColour technology
  4. Habitat by Resene, What colour should my roof be?
  5. Resene, Top protection for your roof
  6. Dulux NZ, Roof & Trim
  7. Dulux NZ, Colorsteel colours
  8. COLORSTEEL, Best roof colour choices for homes in Auckland
  9. COLORSTEEL, Choosing the perfect colour for your environment
  10. COLORSTEEL, Warranty and maintenance
  11. Auckland Council, Auckland Unitary Plan chapter D18 Special Character Areas Overlay
Call Now Button REQUEST AN ESTIMATE